|
NW IA | I made this modification to a panel to make it easier to move and set in place without shifting from side to side etc. I have a couple that I move fairly often and this worked well.
The thing I don't like is that it will interfere with moving several panels at a time and the next one I do will be on top of the top pipe so I can lift multiples on the bottom of the pipes. Hope this makes sense.
I thought I'd ask here first and see if anyone else has modified an fsp to address the sliding issue when moving and setting them. May not be a problem to anyone else.
 (IMG_20241104_154352235_HDR (full).jpg)
 (IMG_20241104_154439858 (full).jpg)
Attachments
----------------
 IMG_20241104_154352235_HDR (full).jpg (203KB - 5 downloads)
IMG_20241104_154439858 (full).jpg (194KB - 3 downloads)
| |
|
Free Standing Panel Modification
