|
Bloomfield MO | I’d say cam is ok. Skip that because that’s a whole other animal than just doing an inframe. How does the lliner beside it look? You might just do a cylinder pack kit for that one or two cylinders. As stated check your liner protrusion and get the correct brass liner shims to get the liner fire ring at the correct height. You don’t have a piston cooler problem, as those are steel and it would’ve burnt down if the cooler failed. Been alot of trucks and tractor that have just fixed a certain cylinder. Now, if you mains and rod bearings are showing significant wear, do them all.
 (IMG_5267 (full).jpeg)
Attachments
----------------
 IMG_5267 (full).jpeg (117KB - 2 downloads)
| |
|
To rebuild or not to rebuild
