|
Northeast Iowa | Bought a Kinze planter set up with AgLeader row clutches. Came with an AgLeader Integra to control and monitor the planter. Going to be pulling with a Case 245 magnum that already has a Pro 700. Need GPS signal to the Integra to run row clutches. I could use the Pro 700 for auto steer and connect to the Integra with a cable to feed it a GPS signal needed for the clutches. Has anyone tried something like this? Any issues with the signal going between the two monitors? Or would I be better off putting the AgLeader globe and steer command I have on and use the Integra for both planter monitoring and guidance and remove the 700 and get everything on one monitor? | |
|
Pro 700 and Integra
